• Intel Core i3-370M Processor (2.4 GHz)
• Nvidia G310M Graphics Engine with 1 GB DDR3 Dedicated VRAM and Optimus Technology
• 4 GB of DDR3 1066MHz DRAM (2 GB x 2 slots)
• Intel Wireless 802.11 b/g/n + WiDi
• 500 GB Hard Drive (5400 RPM)
• Windows 7 Home Premium (64 bit) Operating System (which I upgraded to Pro)
• 13.3-Inch HD (1366×768) LED Display
• HDMI Port
• USB 3.0 port
• Bluetooth
• 8 cell 5600 mAh battery

The one thing it doesn’t have that I realized just now is that the computer doesn’t have an optical drive. I didn’t know that before. I guess I assumed that all computers except for netbooks have them. It’s not really a big deal though.Since my laptop kind of died on me earlier, there weren’t many things I could do to solve the problem. I pretty much only had three options: get my laptop repaired, buy/borrow a monitor for the duration of my stay, or buy a new laptop.

Repairing my laptop was definitely the first thing I tried. I researched on how to fix it, but I couldn’t even get the screws out to even peek at the insides. Right now, I still think that the problem inside the computer is just a loose connection. Unfortunately, I can’t confirm that. I could let Dell fix the computer, but my warranty expired a long time ago. I also bought the computer from Canada and would have to go through lots of red tape just to get it repaired by Dell Europe.

The next thing I tried was to find someone who had an extra monitor I could borrow. Since all my friends in Germany are all interns or thesis students, they all had only a laptop and not an extra display. Although, I did manage to borrow one for like a week until I had to return it. I could have bought a new monitor, but then it would have been really been difficult to bring home a 20 something inch screen (if I’m buying a monitor to keep then I wouldn’t buy anything smaller). I didn’t feel like buying a cheap one and just leaving it behind when I leave Germany either.

In the end, I ended up buying a new laptop (with much financial assistance from my parents). I figure my old laptop is getting old anyways (2007), and for the past year and a half it had been failing to keep up with my intense computer usage habits. When I return to Vancouver, I’ll get this laptop repaired and then my parents could use it (or my brother if he decides that he needs to bring a laptop somewhere).

Link: http://ericwijaya.wordpress.com/2010/03/12/vmware-usb-cannot-connect-to-host-usb/

The Blog-Health-o-Meter reads This blog is on fire!.

Crunchy numbers

A Boeing 747-400 passenger jet can hold 416 passengers. This blog was viewed about 6,600 times in 2010. That’s about 16 full 747s.

In 2010, there were 85 new posts, growing the total archive of this blog to 120 posts. There were 48 pictures uploaded, taking up a total of 3mb. That’s about 4 pictures per month.

The busiest day of the year was November 23rd with 83 views. The most popular post that day was South Korea: Yet Again Swallowing the Bitter Pill.

Where did they come from?

The top referring sites in 2010 were zamunda.net, facebook.com, dailyblogged.com, google.com, and en.wordpress.com.

Some visitors came searching, mostly for p1i windows 7, p1_usb_signed_drivers, p1_usb_signed_drivers.rar, p1_usb_signed_drivers package, and failed to load resource sony ericsson.

Attractions in 2010

These are the posts and pages that got the most views in 2010.

South Korea: Yet Again Swallowing the Bitter Pill November 2010
1 comment

Connecting a Sony Ericsson P1i to a Windows 7 x64 Computer in Phone Mode December 2009
1 comment

Snow Leopard on a Dell Inspiron 1520 June 2010
17 comments

How to Install Solidworks 2008 on a x64 Operating System November 2009

SolidWorks 2010 Side-By-Side Configuration Error Fix August 2010
5 comments

The configuration that I used was that I had my computer connected to an XBee USB Explorer via USB.  On the other end was an Arduino Duemilanove powered by six 1.2 V NiMH batteries, and this microcontroller powered the XBee using its 5 V pin.  I compiled and downloaded the program at the bottom of the article to my Arduino and I tested it using the Serial Monitor that comes with the Arduino IDE.

Even though the test program is simple, it shows that a wireless link can be made between the computer and the microcontroller, meaning that the microcontroller can process computer input to do even more crazy things.

Link: http://forums.trossenrobotics.com/tutorials/how-to-diy-128/xbee-basics-3259/

Computer Specs:

Intel Core 2 Duo T5250 Processor
2 GB RAM @ 667 Ghz
Intel GM965 Chipset
nVidia GeForce 8600M GT
Dell Wireless 1390 802.11g

Installation

I was lucky enough to only need the Retail Snow Leopard Disc (10A432) and the myHack Installer 1.0.1.  I pretty much followed METHOD 2 in this guide (method 1 didn’t really work out for me, but it might have had something to do with the disc restoration part of the guide):

http://prasys.co.cc/2009/08/installing-snow-leopard-for-osx86/

For the myHack installer, check the box for the kext that says something about PS2 in it.  It will enable the laptop touchpad and keyboard.  Also, read the description for each kext to see if you need it or not.

When I used method 1 in the guide, I had some trouble with an installation error that said “Could not verify BaseSystem.pkg” or something along those lines.  That error appeared at about 10-15% installation progress.  It went away then I used method 2.  I did read somewhere that it may have had to do with the restoration in Disk Utility.  Either way, it worked the second time around.

Once SL was installed, I ran the myHack Installer on my drive to get the Chameleon Bootloader on there so I wouldn’t have to use my USB to boot all the time.  Also, be sure not to install GraphicsEnabler as it will prevent your computer from shutting down completely (more on that later).

Graphics

Since my laptop uses an nVidia card, there is an issue that prevents the computer from shutting down completely if the “GraphicsEnabler” option is used in the myHack Installer.  I believe NVInject, NVKush, and NVDarwin all suffer from this same problem.  What happens is that when the shut down command is invoked, the computer’s screen will turn off, the HD will turn off, but the power stays on.  When the nVidia graphics kexts aren’t used, this problem goes away.

I’ve tried generating an EFI String and loading that with EFI Studio, but it didn’t do the job.  The resolution is still 1024×768 and I have no QE, CI or OpenGL support.  What I did later on was install PC EFI to see if that would fix things (I didn’t really know what I was doing here at this point).  That didn’t really work, but I did later find out that EFI Studio allows me to add boot flags.  I added “Graphics Mode”=”1280x800x32” to the boot flag so now it boots with the proper resolution.  It gives the proper resolution, but still no QE/CI or OpenGL.  This guide has information on how to test for QE (Quartz Extreme) and CI (Core Image): http://prasys.co.cc/tag/enable-qeci/

Another thing I tried was to modify my DSDT to get my graphics card working using this link: http://tonymacx86.blogspot.com/2010/01/advanced-dsdt-fixes-nvidia-graphics.html.  I managed to get the card recognized using the DSDT code, but when I got rid of the graphics kexts, and the boot.plist options as specified in the guide, I lost my graphics acceleration.  I know my DSDT code is working here still since System Profiler tells me what card I have with the exact same names that I gave in the DSDT.  It seems that having graphics acceleration and shutdown/restart working properly just isn’t meant to be.

The tradeoff:

I either could have proper graphics acceleration and no shutdown, OR I could have shut down and no graphics acceleration.  Graphics is the clear winner here, but I still hate having no shutdown.  I have not found a fix for this.

Power Management

There was a problem with high CPU temperatures with the laptop.  I installed the VoodooPowerMini kext located here (http://forum.voodooprojects.org/index.php/topic,1095.0.html)

Audio

After looking for various kexts, I found that VoodooHDA worked for me.  It can be found here (http://www.kexts.com/view/70-voodoohda_(32–_64-bit,_recompiled_by_prasys).html).

Wireless

Works after installation.

USB Ports

They work since it can recognize my mouse and USB drive.

Battery Indicator

I used the VoodooBattery kext located here (http://forum.voodooprojects.org/index.php/topic,1092.0.html)

Card Reader

I don’t use this so I didn’t install the kext for it.  It can be found here: http://www.dailyblogged.com/retail-snow-leopard-installation-guide/ or SD Card Fix (more direct).

Touchpad

I had an issue where I couldn’t tap the touchpad in order for it to “click”.  I fixed this issue by installing the VoodooPS2Controller kext (check the Trackpad option during the installation) (http://forum.voodooprojects.org/index.php/topic,235.0.html).  Then I installed the preference pane (this allows configuring the Trackpad through System Prefs) here http://www.dailyblogged.com/retail-snow-leopard-installation-guide/ (command -f to find it).  I opened System Preferences and pressed the Show All button, and I saw a “Trackpad” option, so I opened it and the option was there.

Webcam

Works after installation.

Conclusion

Everything I listed here works except for video and the card reader.  There are other things like Ethernet, but I don’t really use it.

This assumes that: 1. you don’t have any drivers installed, 2. you don’t have PC Suite installed. Otherwise you may need to do the steps differently.

1. Install PC Suite for Sony Ericsson from their support site, the version for your device, and restart.
2. Connect your phone to the USB cable and let it install the wrong drivers that it does automatically automatically.
3. Uninstall old drivers (very important, in device manager uninstall and check the “delete drivers” checkbox on: “Ports Com&LPT->Sony Ericsson … something”, “Universal Serial Bus Controllers->Sony Ericsson … somethin” (there should be 2 listed))
4. Disconnect your phone from USB
5. Restart Windows
6. Unpack the p1_usb_signed_drivers package
7. Right click the setup.exe and choose “Vista” compatibility mode, apply.
8. Right click the setup.exe and choose run as administrator and install
   (If there are any errors with this driver package you will have to uninstall and reinstall it and reboot until it works, and maybe try other compatibility modes)
9. If the drivers were successfully installed, disconnect from the Internet, so that it doesn’t automatically download wrong drivers when you connect your phone.
10. Once disconnected from the Internet, connect your phone, and it should find the drivers and the mrouter driver.

You may need to do the steps differently if you don’t have the drivers already installed, or PC suite already installed.

Source: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/47fe4ea2-7d73-4615-9a7e-5f5dd4ff8546

UPDATE (Dec 7/ 09):  For me, this method was kind of on and off.  I used this method and it worked, but then after I reinstalled the firmware on my phone, PC Suite was no longer able to identify my phone anymore.  I uninstalled the drivers from device manager, and let Windows 7 install my drivers for again and it worked.  I guess I can’t really narrow down which method works, but this is worth a shot I guess for those who are looking for solutions